Tianfeng facility building in Songjiang, Shanghai

Tablet Press FAQs

Answers to common questions about equipment selection, materials, tooling, quotations and project support.

Start here when planning a tablet production project. For model-specific limits and an equipment proposal, send your product details and material information to Tianfeng.

Machine Selection & Quotation

What information should I send to request a tablet press quotation?
Send the material or formulation type, tablet drawing or sample, target weight and dimensions, required saleable output, available power supply and destination country. Mention special shapes, multiple layers or a complete production line. These details help Tianfeng review a suitable machine and tooling configuration. See the tablet press selection guide.
What determines the price of a tablet press machine?
Price depends on the model, tooling, feeding arrangement, controls, material-contact requirements and optional auxiliary equipment. Packing, delivery terms and installation scope also affect a project quotation. Request a configuration-based quotation rather than comparing model names alone.
How should I compare rated output with my production target?
Catalogue output is a model reference under stated operating conditions. Achievable output also depends on the formulation, tablet size and shape, filling behaviour, compression dwell time, layer configuration and quality requirements. Compare the required accepted-tablet output with a material trial and the agreed technical specification.
Should I choose a single punch or a rotary tablet press?
A single punch press can suit small batches, formulation trials and development work. A rotary press uses multiple tooling stations for continuous production. The right choice depends on batch size, material behaviour, tablet dimensions, available space and the required control level. Compare single punch and rotary presses.
When should I consider a high-speed rotary tablet press?
Consider a high-speed model when sustained production volume justifies the equipment and the formulation can fill and compress consistently at the required speed. Review feeding, precompression where available, dust extraction, downstream equipment and changeover requirements together. A higher nominal speed alone does not establish suitability.

Materials, Tablet Shapes & Tooling

Can my powder be compressed directly, or does it need granulation?
Direct compression requires suitable flow, compactability and formulation uniformity. Some materials require granulation, drying or other preparation before pressing. Provide representative material and its preparation method so the complete process can be assessed. Read about factors affecting tablet quality.
Can a tablet press produce milk tablets, compressed candy and special shapes?
Suitable formulations can be compressed into milk tablets, hard compressed candy and shaped tablets using a compatible press and custom punches and dies. The powder or granules must be prepared for compression. Shape, embossing, edge strength and ejection should be checked with tooling drawings and a trial; these finished products are not soft gummy candy.
Can one machine make double-layer or two-colour tablets?
Only a model configured for multiple filling and compression stages should be considered for layered tablets. Review the layer materials, individual layer weights, bonding and cross-contamination control. The ZPW21/23 product information includes layered-tablet output references; the exact feeding and tooling configuration must be confirmed for the application. Review the ZPW21/23 series.
What needs attention when pressing effervescent or salt tablets?
Effervescent materials can be sensitive to moisture, while salt-based materials may create corrosion, abrasion or ejection challenges. Review the formulation, moisture control, contact surfaces, tooling, dust collection and packing process. Suitability should be established for the actual material rather than assumed from the tablet name.
Can I reuse existing punches and dies on a new machine?
Do not assume that tooling is interchangeable. Confirm the tooling standard and all relevant dimensions, including head and barrel geometry, working length, die size, keying and tablet profile. Tianfeng can review drawings or samples against the proposed model. Read the punch and die maintenance guide.

Project Configuration & Delivery

Can Tianfeng help configure a complete tablet production line?
The equipment scope can be reviewed from material preparation through mixing, granulation, drying, compression and supporting operations, according to the process. Share the intended product, target output, room layout and existing equipment so interfaces and responsibilities can be defined. Browse the equipment catalogue.
What electrical and site information is needed before ordering?
Confirm voltage, frequency, phase, available power, room dimensions, access openings and relevant utilities. State any dust extraction, compressed-air, environmental or downstream connection requirements. The final supply and utility requirements belong in the approved technical agreement.
Can we arrange a material trial or factory acceptance inspection?
Discuss sample availability, sample quantity, handling requirements and the acceptance criteria with Tianfeng before arranging a trial or inspection. Agree which tablet dimensions, weight variation, appearance, output and other checks will be evaluated, and how results will be documented.
What are the delivery time, packing and shipping terms?
Lead time and shipping arrangements depend on the selected configuration, tooling, order schedule, destination and agreed trade terms. Ask for these items in the written quotation. Avoid treating a general website statement as a commitment for a particular order.

Operation, Maintenance & Technical Support

What training and installation support should be agreed before purchase?
Confirm the installation responsibilities, training format, documentation language and any on-site or remote support requirements in the quotation. The machine, site conditions and project location determine the practical scope. Operators should use the instructions supplied with their specific machine.
How can I reduce tablet weight variation, sticking or capping?
Start by recording the material batch, moisture condition, machine speed, feeding and compression settings, and the observed defect. Review material flow, tooling condition and the process together. Adjustments should follow the machine instructions and be verified by product-quality checks. See the troubleshooting guide.
How should punches and dies be cleaned and maintained?
Follow the tooling and machine instructions for cleaning, inspection, drying, lubrication and protected storage. Inspect tips, die bores and contact surfaces for damage or wear, and keep tooling sets identified. Stop using damaged tooling and investigate the cause before production resumes. Explore tooling service-life guidance.
What information helps Tianfeng diagnose a machine issue or identify spare parts?
Provide the model, serial number, relevant part number or drawing, clear photographs, a short video where appropriate, and the operating conditions when the issue occurs. Describe recent material or setting changes. Isolate the machine safely before inspection and follow the supplied operating manual.

Still have a question?

Tell us your material, tablet size and required output. Send an inquiry for a configuration review.

LET'S DISCUSS YOUR APPLICATION

Need Reliable Pharmaceutical Equipment?

Tell us about your material, product and required output. Our team will help you find the right equipment and configuration.

  • Tablet presses and solid dosage equipment
  • Equipment selection and technical advice
  • Factory-direct project support
winni@shtf.cn

Leave a Message

Fields marked are required.

Your information is used to respond to your inquiry.

Send Inquiry

Call us

+86 13917060258

Email us

winni@shtf.cn

WhatsApp

+86 13917060258