English
Español
العربية
Français
Português
Deutsch
ไทย
Polski
Türkçe
Русский
FL Series Fluid Bed Granulator
One-vessel granulation and drying for efficient solid-dose material preparation.
- Designed for integrated fluid-bed granulation and drying using formulation powders that need agglomeration, moisture distribution and controlled drying.
- Process objective: free-flowing granules prepared through a coordinated fluid-bed process with fewer material transfers.
- Available models: 9 models, from FL-5 to FL-500; compare the full range in the technical table.
- Share your material, required batch size or output, and power supply to receive a suitable configuration and quotation.
Built Around the Requirements of FL Series
The FL Series Fluid Bed Granulator is designed for integrated fluid-bed granulation and drying. It processes formulation powders that need agglomeration, moisture distribution and controlled drying to deliver free-flowing granules prepared through a coordinated fluid-bed process with fewer material transfers. Typical applications include pharmaceutical wet granulation, nutraceutical granule production, instant food and beverage powders, chemical agglomeration, scale-up and commercial batch processing.
Good equipment selection begins with the product rather than the machine alone. For the FL Series, Tianfeng first considers the physical behavior of the incoming material, the required product characteristics, the production schedule and the way operators will clean and maintain the equipment. These factors influence the most suitable working configuration, material-contact specification, controls and line connections. The objective is not simply to supply a machine that can run, but to establish a practical process that can be repeated from batch to batch.
The published product image shows the external arrangement of the FL Series, while the technical table reproduced from the Tianfeng product manual below provides the original family and model data. Compare the model columns to select the capacity and dimensions that fit your process. Because final performance depends on the processed material and chosen options, the manual data should be used as a selection reference and confirmed again in the technical proposal.
Why Buyers Choose the FL Series
Clear Process Role
The FL Series is selected around a defined production task instead of a vague equipment label. Its configuration should be matched to the incoming material, required finished product and the practical rhythm of the plant. This makes specification discussions more useful: the buyer can describe the process challenge, and Tianfeng can confirm how the selected configuration should be equipped for the application.
Integrated processing stages
A key reason to consider the FL Series is integrated processing stages. The mechanical arrangement is intended to keep the main process direct and understandable, helping operators follow a repeatable sequence from material preparation through product discharge. A clear workflow also supports more predictable scheduling, easier operator training and faster identification of the settings that matter most for product quality.
Efficient heat and mass transfer
The machine is designed around efficient heat and mass transfer. Stable material movement and a controlled process zone help reduce unnecessary variation between batches. Final performance still depends on the formulation and selected settings, so Tianfeng reviews the material characteristics, product target and expected output before confirming the recommended configuration.
Reduced product handling
For daily production, reduced product handling is as important as nominal machine capacity. The equipment layout supports practical observation, routine cleaning and planned maintenance. Product-contact materials, surface treatment, guards and access arrangements can be confirmed for the project so that the delivered machine fits the buyer's internal hygiene and operating procedures.
Controlled batch workflow
The FL Series offers controlled batch workflow for new lines, replacement projects and capacity upgrades. Voltage, control language, feeding or discharge connection, dust-management interface and other project details can be discussed before manufacture. This project-based approach avoids treating one standard specification as suitable for every material and every factory.
Support from Selection to Start-Up
Tianfeng Machinery can review samples, target product data and line-layout information before quotation. The resulting proposal can identify the appropriate model, key options, utilities and connection points. After delivery, clear operating and maintenance documentation helps the production team build a dependable routine around the FL Series and keep the equipment available for planned production.
FL Series Technical Parameters
The table below is taken directly from the supplied Tianfeng product manual. It preserves the model names, units and published values for comparison. The columns compare the models in this product range. If your material, voltage, tooling, controls or installation conditions differ from the standard arrangement, request a confirmed technical sheet with the quotation.
| Parameter | FL-5 | FL-10 | FL-20 | FL-30 | FL-60 | FL-120 | FL-200 | FL-300 | FL-500 |
|---|---|---|---|---|---|---|---|---|---|
| Raw material vessel volume (L) | 27 | 35 | 73 | 112 | 220 | 566 | 739 | 976 | 1500 |
| Production capacity (kg/h) | 5 | 15 | 20 | 30 | 60 | 120 | 200 | 300 | 500 |
| Steam pressure (MPa) | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 |
| Steam consumption (kg/h) | 45 | 80 | 116 | 116 | 240 | 380 | 420 | 520 | 800 |
| Compressed-air pressure (MPa) | 0.4-0.7 | 0.4-0.7 | 0.4-0.7 | 0.4-0.7 | 0.4-0.7 | 0.4-0.7 | 0.4-0.7 | 0.4-0.7 | 0.4-0.7 |
| Compressed-air consumption (kg/h) | 0.3 | 0.6 | 0.9 | 0.9 | 0.9 | 0.9 | 1.5 | 1.5 | 1.5 |
| Fan power (kW) | 7.5 | 7.5 | 11 | 11 | 18.5 | 22 | 30 | 37 | 45 |
| Overall width W (mm) | 1200 | 1200 | 1480 | 1480 | 1660 | 1890 | 2090 | 2290 | 2300 |
| Overall height H (mm) | 3760 | 3760 | 4000 | 4000 | 4420 | 4540 | 5100 | 5180 | 5600 |
| Overall height H1 (mm) | 3270 | 3270 | 3600 | 3690 | 3690 | 4230 | 4315 | 4420 | 4800 |
| Overall diameter Φ (mm) | 800 | 800 | 1000 | 1000 | 1200 | 1400 | 1600 | 1800 | 1800 |
Technical data transcribed from the supplied Tianfeng Machinery product manual. Final specifications are subject to the confirmed order configuration.
Where the FL Series Fits
The FL Series can be considered for pharmaceutical wet granulation, nutraceutical granule production and instant food and beverage powders. It can also support chemical agglomeration and scale-up and commercial batch processing when the material and target product fall within the confirmed operating range. The same model may therefore serve different industries, but the correct result depends on matching the machine to the process rather than relying on the model name alone.
For a new production line, the equipment should be reviewed together with upstream preparation and downstream handling. Feed method, discharge height, dust control, operator access and cleaning space can affect daily usability. For a replacement project, Tianfeng can compare the existing line interface and room layout so the FL Series is easier to position and connect. For capacity expansion, the discussion should use realistic product data and planned operating hours instead of theoretical output alone.
Product trials or detailed technical communication are particularly valuable when the material is cohesive, fragile, heat-sensitive, abrasive or otherwise difficult to process. Sharing representative samples and clear acceptance criteria allows the proposal to focus on the variables that matter to the buyer, including product quality, recoverable yield, cleaning time and safe operation.
- Pharmaceutical Wet Granulation
- Nutraceutical Granule Production
- Instant Food And Beverage Powders
- Chemical Agglomeration
- Scale-Up And Commercial Batch Processing
How to Specify the Right FL Series Fluid Bed Granulator
Before ordering the FL Series, provide Tianfeng with the material name, composition or general formulation, bulk density, moisture condition and any relevant flow, heat or dust behavior. Describe the target product and the quality indicators that matter in production. These details allow the engineering team to review whether the standard FL Series arrangement is appropriate or whether another model or option would provide a better technical fit.
Output should be discussed as a practical production target. The brochure parameter is useful for initial comparison, but actual results depend on the material, product dimensions, selected settings, feeding stability and operating practice. Utilities should also be confirmed early, including electrical supply, compressed air, vacuum, steam, hot water or exhaust where relevant to this equipment type.
Finally, confirm the installation environment. Door and lift dimensions, floor loading, ceiling height, service clearance, cleaning route and the position of connected equipment can influence layout and delivery planning. A drawing review before manufacture helps prevent avoidable site modifications and gives both teams a clear reference for the approved project.
- Batch Size And Starting Moisture
- Binder And Spray Requirements
- Target Final Moisture
- Air-Handling And Heating Utilities
- Filter, Control And Cleaning Configuration
Integration, Operation and Maintenance
The FL Series should be integrated into a workflow that gives operators enough space to load, observe, discharge and clean the equipment safely. Material staging and containers should be planned so that the machine is not left waiting for the previous process. Downstream receiving equipment should accept the product without unnecessary drops, hold-up points or exposure. If several machines are linked, control signals and emergency-stop responsibilities should be defined as part of the line design.
A practical start-up plan includes operator training, an agreed cleaning method and a preventive-maintenance schedule. Wear parts and consumables should be identified before routine production begins. Operators can then record the settings associated with acceptable product, while maintenance staff track inspection intervals and replacement history. This disciplined approach helps preserve repeatability and supports faster troubleshooting when material or operating conditions change.
Tianfeng can coordinate model confirmation, manufacturing details, pre-shipment checks and documentation for the project. Buyers who share complete process information early usually receive a more accurate proposal and avoid late changes to tooling, utilities or connections.
Request a Quote for the FL Series
Send your material, target product, required capacity, voltage and destination. Tianfeng will review the application and confirm the recommended configuration.
Product images and manual parameters are for model identification and preliminary selection. Final dimensions, output and configuration are governed by the approved technical agreement.